AIT S-26 Resistance Welding Electrode

The S-26 series electrode is designed for use in welding wires. The groove in the tip can capture the wire and provide more surface contact between the electrode and the wire. Understanding AIT part numbers is very simple.  Various dimensions on the drawing are represented by letters, which correspond to values in the part number.  The beginning of the part number establishes the electrode series and material, followed by various dimensions. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section.
Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the electrode series and material, followed by various dimensions. For example, part number S-26-M-A.007B.005C.012D.0015 is a molybdenum electrode with an A dimension of .007 . You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number. Equivalent Hughes part numbers are listed below cross referenced to AIT part numbers.
Invalid Input
Invalid Input
Invalid Input
Invalid Input

To request a quote for a custom part number, fill in the blanks in this sample part number below and indicate the quantity desired under comments:

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input
About Us

Advanced Integrated Technologies is essentially a manufacturing service company with two major divisions. The resistance welding and reflow soldering tool division grew out of our early work building micro tools for Hughes Aircraft. About the time that Microsoft was turning computers into a household item, computer hardware manufacturers were looking for companies to build reflow tools used in the assembly of hard drives and other components.

10 ars
Get in touch

Address: 361 Industrial Drive, Mountain View, AR 72560

FAX: +1 888 495 5116

Our Services